Lightweight, stable and easy to assemble, Transkit screens with 1mm stips are an economical alternative to delimit workplaces. The greater thickness of the stips, compared to traditional 0.4mm curtains, gives the Transkit 2000 greater resistance to projections, greater overall mechanical resistance and greater longevity. With a painted steel frame and equipped with 4 overlapped welding strips with 1600 mm high and 570 mm wide that are hung from the upper longitudinal bar of the structure by means of 13 metal rings, Transkit is a portable structure that is easy to transport around the workshop, guaranteeing maximum versatility of use. With a modular design, Transkit screens are enabled to create welding booths by juxtaposing their bases at a 90º angle.

Lightweight, stable and easy to assemble, the Transkit 2000 with curtain screens are an economical alternative to delimit workplaces. Made and designed in Spain. With a painted steel frame and equipped with 1 welding curtain 1600 mm high and 2000 mm wide that is stretched between the two longitudinal bars of the structure, Transkit is a portable structure that is easy to transport throughout the workshop, guaranteeing maximum versatility of use. With a modular design, Transkit screens are enabled to create welding booths by juxtaposing their bases at a 90º angle.

Main Features The temporary anchor strap is a fall protection system for working at heights. It is made of 30 mm wide polyamide webbing, sewn in a way that provides two types of openings to position the connector and create an anchorage point. It enables the creation of a secure anchor on beams, poles, etc. This is a fall protection system intended for temporary use. The anchor strap is certified and complies with EN795 (Type A: provisional transportable anchorage device). Main Applications Access work using portable ladders Access via fixed vertical ladders Truck loading/unloading operations Scaffold assembly work Work on rack-and-pinion or suspended scaffolds Work on utility poles and towers Assembly of prefabricated structures, metal or wood Horizontal formwork installation Work on loading/unloading platforms or at floor edges Installation of collective protective systems Work on flat roofs Work on sloped roofs Rope access work Rescue operations Other temporary height-related tasks At Safeway360, we have a team of safety technicians who provide expert advice and installation to keep you safe during work at heights. We specialize in special risk environments—ask us about our full range of lifeline and anchorage solutions.

Main Features The provisional anchorage strap is a fall protection system for work at heights. It is made of 30mm wide polyamide, stitched to provide two types of openings for positioning the connector and creating an anchorage point. The strap is designed to create an anchorage point on beams, posts, etc. It is a fall protection system intended for temporary interventions. The anchorage strap is certified and complies with the EN795 standard (Type A: provisional transportable anchorage device). Main Applications Intended for use in activities with a risk of falling from height, such as: Access work using ladders Access to fixed vertical ladders Truck loading/unloading tasks Construction and scaffold assembly Maintenance on utility poles and towers Assembly of prefabricated, metal, or wooden structures Horizontal formwork assembly Activities on loading/unloading platforms or slab edges Installation of collective protection systems Work on flat roofs or coverings Rescue operations, among others At Safeway360, we have a team of safety specialists who provide advice and installation services to ensure you avoid risks while working at height. We are experts in special risk environments — explore our full range of lifeline and anchorage products.

Main Features Protectors designed to shield areas from minor impacts. Their cylindrical shape increases the protected surface while occupying less space. Due to the variety of places where they can be applied, several different models have been designed: “L” cut for corners, “U” cut for edges, ridges, or borders, and flat cut. Primary Applications Can be applied on almost any surface to protect machinery, columns, equipment, shelves, walls, stairs, low-clearance zones, IPN beams, etc. Technical Specifications Dimensions: 40 x 36 mm x Length 1 meter, type “AA” Material: Polyurethane Color: Yellow/Black Self-adhesive Also available in rolls of 5 and 50 meters (depending on color) Colors: Yellow/Black, Red/White, White, and Black Adhesion: 21 N/25 mm Temperature resistance: from -40 °C to +100 °C Fire test: DIN 4102 B2

Main Features Protectors designed to protect areas from minor impacts. Their cylindrical shape increases the protected surface while occupying less space. Given the wide variety of places they can be installed, several different models have been designed: “L” cut for corners, “U” cut for edges, ridges, or borders, and flat cut. Primary Applications Can be placed on almost any surface to protect machinery, columns, equipment, shelves, walls, stairs, low-clearance areas, IPN beams, etc. Technical Specifications Dimensions: 40 x 36 mm, interior 8 mm, Length 1 meter, type “BB” Material: Polyurethane Color: Yellow/Black Without self-adhesive Also available in rolls of 5 and 50 meters (depending on color) Colors: Yellow/Black, Red/White, White, and Black Adhesion: 21 N/25 mm Temperature resistance: from -40 °C to +100 °C Fire test: DIN 4102 B2

We implement individual garment identification systems using RFID chips, allowing tracking throughout the entire process: delivery, use, washing, and maintenance. Each garment is associated with a user, facilitating precise inventory control, preventing losses, and improving the client's internal organization. Furthermore, traceability provides a complete history for each garment, offering transparency, operational control, and support for audits or regulatory requirements. We offer an online portal where each client can view the number of items per user and the complete traceability.

Main Features Trench cover plate 12/8/700: molded in a single piece from reinforced fiberglass, it is designed for outdoor work, offering strength and safety. It is non-slip with chamfered edges. Lighter than a metal plate and stronger than wood, it supports a distributed weight of up to 1,000 kg. Suitable for trenches of 700 mm. Main Applications This plate is designed for outdoor work, providing durability and safety. It is intended for street works to overcome uneven ground that may cause accidents for pedestrians. Perfect for covering trenches in small urban construction sites and to facilitate access for both pedestrians and vehicles. Technical Specifications Reference 2.05.042.02 Length 1,200 mm Width 800 mm Trench Depth 700 mm Weight 12 kg Breaking Load 1.5 Tons

Technical Features The 160x120 cm molded trench cover plate is manufactured in a single piece using fiberglass-reinforced composite. It features a non-slip top finish and chamfered edges for excellent stability. Suitable for trenches up to 900 mm deep. Its reinforced structure allows it to support vehicle loads up to 2.5 tons. A lightweight and essential element for construction work. Its yellow color increases visibility, and its rounded edges enhance safety. Main Applications This plate is designed for outdoor work, providing durability and safety. It is intended for street works to overcome uneven ground that may cause pedestrian accidents. Perfect for covering trenches in small urban construction projects and to facilitate access for both pedestrians and vehicles. Technical Specifications Available sizes: 1200×800 mm. Weight 14 kg. Maximum load capacity 2000 kg. For trenches up to 600 mm wide. 1600×1200 mm. Weight 33 kg. Maximum load capacity 2500 kg. For trenches up to 900 mm wide. Reference 2.05.095.02 Length 1600 mm Width 1200 mm Trench Depth 900 mm Weight 33 kg Thickness 5 mm

The TRTL Ladder Cover is a unique product designed to restrict access to all types of ladders. It was designed to meet the needs of businesses concerned about the risks posed by unauthorized access to elevated areas. It serves the triple function of signaling the danger, restricting ladder use, and securing its use with a lock.

Main Features: Two-sided metal corner fixed to the floor to protect corners, uprights, and protrusions. Main Applications: Suitable for any industrial environment; designed to protect shelving, corners, uprights, angles, etc. Technical Specifications: Height: 350 mm Angle dimensions: 140 mm x 140 mm Thickness: 5 mm Model: SW371S

The ORANGE range, in HIGH VISIBILITY orange and red, is inherently flame-resistant, antistatic, and offers arc flash protection. It features high color fastness and guaranteed illuminance, complying with EN-20471.

As a result of scrupulous studies on the use of high elastic memory polymers U.GO has been developed for roads and highways applications as delineator post with homologated retrorefl ective bands. Its high elastic memory permits the bollard to deform itself completely during the impact turning in its original position and in its original shape also after many vehicles passages without registering damages neither to the vehicle nor to the bollard. High visibility also from long distances is assured by the application of more refractive bands. Because of its many features, mainly its elasticity and fl exibility, U.GO is the ideal solution as Signal and Delineator for those areas characterized by goods handling and vehicles movement: warehouses, parking, roads, highways etc. The very simple and fast fixing through its bayonet system makes U.GO stretchy bollard perfect and suitable for many diff erent application fields.

Maximum height: 0.52 m INDUSTRIAL STOOL WITH FOLDABLE LEGS AND SPECIAL PLATFORM 130/180x45 CM This industrial stool with foldable legs is designed for professional use. Made of extruded ribbed aluminum. Steps are 8 cm deep and welded to the uprights, forming a very sturdy structure. The platform surface is made of weather-resistant, painted, non-slip wood. A safety pin locks the legs both when folding and unfolding. When closed, it takes up very little space, making it easy to store and transport. Equipped with a hole in the platform that serves as a handle for comfortable carrying. Its non-slip PVC feet and wide base improve operator stability and comfort. The UPDOWN MG model is 15 cm wider than the UPDOWN M, allowing more comfortable movement on the platform. This foldable-legged industrial stool is designed for bricklayers, ceiling painters, painters, and plasterers. Ideal for body shops because it allows the operator to move without interrupting work. UPDOWN MG 130 Platform height: 0.52 m Working height: 2.50 m Closed dimensions: 18 x 131 x 55 cm Platform dimensions: 130 × 45 cm Weight: 10.5 kg UPDOWN MG 180 Platform height: 0.52 m Working height: 2.50 m Closed dimensions: 18 x 181 x 55 cm Platform dimensions: 180 × 45 cm Weight: 13.5 kg Additional features: Painted non-slip wooden platform with aluminum frame Reinforcement on the longer steps Opening hinges with patented pin Non-slip PVC feet Labels and user and maintenance manual included Aluminum ladders are mainly used for their great strength. Additionally, it is a lightweight material, making it easy to transport and use in any space or situation. Ask us about all our aluminum ladder models.

Main Features Retractable fall arrest device that requires no calibration or adjustment. The V-EDGE fall arrester is designed for use in horizontal, overhead, and sharp edge applications, enabling clear and easy equipment selection. The retraction damping function controls cable speed, helping prevent damage to the unit and extending product life. Applications Recommended for work at heights and maintenance tasks. Technical Specifications Guaranteed safety: Radial energy absorption technology requires no calibration or adjustment Built to last: Made of stainless steel and high-performance plastics Durability: Retraction damping controls cable speed to prevent damage to the unit Versatile: Suitable for horizontal, overhead, and sharp edge applications Easy inspection: Transparent outer housing allows for quick visual checks Minimal downtime: Cable, energy absorber, and retraction damper can be replaced on-site Available lengths: 6 m, 10 m, and 15 m